Normal Trans Temp 48Re. the 48re is designed to run at a transmission fluid temperature at or near 200° f, although temperature spikes well beyond. The ideal maximum transmission temperature is 200°f. first off i have a full suncoast 48re, with billet input and goerand triple disc converter with a tighter than stock stall. high engine or transmission temperature is by far the automatic transmission’s worst enemy. ambient temps 55 to 60* i recently put a temp gauge on my trans. i just installed the bullydog outlook monitor. After running around most of the day, local and. Or in the absence of sump. just installed the diaprocal trans temp (in the return line) and took it for a 5 mile run last night and it only showed 130 deg. normal calibration will be performed when sump temperature is above 50 degrees f. So here is a fact you should remember: Heat destroys more transmissions than everything else put together. The pcm prevents engagement of the converter clutch. the factory trans temp sensor is part of the gov. It get's the trans temp from the transmission sump temperature probe.
It get's the trans temp from the transmission sump temperature probe. The ideal maximum transmission temperature is 200°f. ambient temps 55 to 60* i recently put a temp gauge on my trans. Heat destroys more transmissions than everything else put together. high engine or transmission temperature is by far the automatic transmission’s worst enemy. i just installed the bullydog outlook monitor. the 48re is designed to run at a transmission fluid temperature at or near 200° f, although temperature spikes well beyond. Or in the absence of sump. After running around most of the day, local and. first off i have a full suncoast 48re, with billet input and goerand triple disc converter with a tighter than stock stall.
48RE Transmission Install how to and highlights YouTube
Normal Trans Temp 48Re The ideal maximum transmission temperature is 200°f. i just installed the bullydog outlook monitor. The pcm prevents engagement of the converter clutch. Heat destroys more transmissions than everything else put together. just installed the diaprocal trans temp (in the return line) and took it for a 5 mile run last night and it only showed 130 deg. After running around most of the day, local and. ambient temps 55 to 60* i recently put a temp gauge on my trans. It get's the trans temp from the transmission sump temperature probe. So here is a fact you should remember: Or in the absence of sump. the factory trans temp sensor is part of the gov. high engine or transmission temperature is by far the automatic transmission’s worst enemy. first off i have a full suncoast 48re, with billet input and goerand triple disc converter with a tighter than stock stall. The ideal maximum transmission temperature is 200°f. normal calibration will be performed when sump temperature is above 50 degrees f. the 48re is designed to run at a transmission fluid temperature at or near 200° f, although temperature spikes well beyond.